TOPIC: Mark 78 question

Mark 78 question 11 years 3 months ago #80915

boatmaniac
Topic Author
Offline
Senior Boarder
Posts: 166
Karma: 5
Thank you received: 1

Hello,

Came home today after a ride with my Aristo Craft Torpedo / Mark 78 and noticed, when lifting the motor, that a little bit of oil/ grease? dripped out from a very tiny "hole" about 2 inches from the flush plug. I like to know if this is normal or if that tiny hole should not be there at all .

I checked my Mark 75 that is on a stand in my office and noticed it has the same tiny hole but not the flush plug!

Who can advise?

Thanks,
Taco.

Attachments:

Please Log in or Create an account to join the conversation.

Re: Mark 78 question 11 years 3 months ago #80958

professor Offline Gold Boarder Posts: 758 Karma: 87 Thank you received: 1	Those are drain holes to prevent casting damage in cold climates. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re: Mark 78 question 11 years 3 months ago #80959

boatmaniac Topic Author Offline Senior Boarder Posts: 166 Karma: 5 Thank you received: 1	Thanks professor! So, nothing to worry about? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.