TOPIC: Got mercruiser questions in I/O section...

Got mercruiser questions in I/O section... 11 years 10 months ago #73287

63g3 Offline Contributing Member Posts: 465 Karma: 62 Thank you received: 2	...just wanna make sure you guys see them if someone can help. Randy Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Got mercruiser questions in I/O section... 11 years 10 months ago #73300

tim_c
Offline
Junior Boarder
Posts: 87
Karma: 11
Thank you received: 0

Randy, read what Jim wrote. If you need parts I have "some" stuff for those early mercruisers. Stuff came in dealer buy outs years ago. Not sure what all I have but I do have the electronic catalog & if you come up with a serial # I can see what I have. There is also some used out drive parts for those . Also have some NOS engine
parts for those old Renault engines they used in those.
Tim

Please Log in or Create an account to join the conversation.

Re:Got mercruiser questions in I/O section... 11 years 10 months ago #73317

63g3
Offline
Contributing Member
Posts: 465
Karma: 62
Thank you received: 2

Hi Tim,
Thanks that's good to know. Sounds like at somepoint it would be best to swap out motor and drive from a late junk 4 cyl I/O but probably could keep this one alive with care and a few parts. Short term most concerned about points and impellor availability and if the cam is belt driven. I thought this maybe a Chevy II 4 cyl but if it's a Renault then wow parts will be real scarce with little network to source. Long term it's everything that would be problematic. I'll get S/N first to help reference what you might have.
Randy