Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: Power tilt and trim for my 74 850 Merc???

Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41086

Does anyone know what year newer Power tilt and trim unit would work on my 74' 850 merc? What years do I need to be looking at for a used unit?

Thanks,

SS

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41108

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
The "Mercaholics" can fill you in on the exact details SS, but I think you'll need one of the units the uses rams that replace the shocks, and use an external pump and reservoir. (70's era, thought I had my hands on one last week but it slipped away, I was too slow getting the deal done!)

Please Log in or Create an account to join the conversation.

Mark

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41123

it does need the 2 piston style. i have the pistons and brackets if needed.

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41124

Yeah I saw that deal, it would have been sweet. I'm just trying to see what year ranges and motor sizes i have to look for. Any idea what a good used price is for a unit?

SS

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41158

50hp on up will fit $400.00 for a good set.

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41164

  • g3jim
  • g3jim's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1009
  • Karma: -27
  • Thank you received: 0
with a little effort you can also take the intermediate housing the mate it to the integral T&T system & bracket.

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #41211

Please explain further...........

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #42001

So what you guys are saying if I understand correctly is that it's as simple as taking the two shocks off and installing the rams, pump, and reservoir. There's no need to switch the motor mount out? I'm assuming the mounts were all the same just with or without the power tilt and trim unit.

Thanks,


SS

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #42004

CORRECT !!!!!!
I have the pistons and mounting brackets for $100.00 for the pair.

Please Log in or Create an account to join the conversation.

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #42036

  • Matt
  • Matt's Avatar
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 586
  • Karma: 3
  • Thank you received: 0
Yep ! thats it...you of course need to mount pump and run wiring up to you for trim switch...and run hoses...if your lucky you'll get one with the rubber groment that the hoses run throught for a clean look...

I have been hunting these set ups down around me...
I have one on my 50hp, picked up another unit that came on a motor, and one another one that guy was going to use but never got around to it...new limit switch and has the dash mount control....

problem with ebay'n for them is price of shipping of a whole set up, that pump weighs a good amount...people are strating to list mics boat stuff on Craigslist , too might be able to find a bad motor with a set up on it...then part motor out and pay for your loss..

Please Log in or Create an account to join the conversation.

Matt in Illinois

I ain't here for a long time, I'm here for a good time !

Re:Power tilt and trim for my 74 850 Merc??? 12 years 10 months ago #42047

  • Matt
  • Matt's Avatar
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 586
  • Karma: 3
  • Thank you received: 0
heres an ebay find like I was trying to describe for you..

cgi.ebay.com/ebaymotors/_W0QQcmdZViewItemQQ_trksidZp3984Q2em1423Q2el2649QQitemZ220833303301QQsspagenameZSTRKQ3aMEWAXQ3aIT


but motor was ruined during boat incident.

Please Log in or Create an account to join the conversation.

Matt in Illinois

I ain't here for a long time, I'm here for a good time !
  • Page:
  • 1
Time to create page: 0.190 seconds

Donate

Please consider supporting our efforts.

FG Login

Glassified Ads

Inboard Gear box
( / Parts / Miscellaneous)

noimage
07-03-2024

Inboard Manifolds
( / Parts / Miscellaneous)

noimage
07-03-2024

1960 Leavens Brothers Victor for sale
( / Boats)

1960 Leavens Brothers Victor for sale
06-27-2024

FiberGoogle

Who's Online

We have 6061 guests and one member online