Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: 1500vid

1500vid 13 years 11 months ago #20795

  • milkdud
  • milkdud's Avatar Topic Author
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 563
  • Karma: 42
  • Thank you received: 3
Ran the 1500 with a 26 cleaver today. I opened it up, but not all the way and it hit 69mph easy. I bet it would have hit 72mph if it would have trim it up more and held on :ohmy:


Just too cold to hang it all out.....


Next year, I will move into the 70mph club. :)

Sorry for the crappy video:

Please Log in or Create an account to join the conversation.

Re:1500vid 13 years 11 months ago #20805

  • MarkS
  • MarkS's Avatar
  • Offline
  • Moderator
  • Moderator
  • Posts: 5348
  • Karma: 118
  • Thank you received: 5
Great job Conrad, you're a brave man. (I saw the ice on the water! ;) ) Bet you're REALLY looking forward to spring now.

Please Log in or Create an account to join the conversation.

Mark

Re:1500vid 13 years 11 months ago #20808

  • Neil
  • Neil's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1997
  • Karma: 65
  • Thank you received: 1
Conrad
Now that was cool (cold)!!
Thanks for sharing.
Nothing like a Tower.
Can't wait to get mine running.
Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re: 1500vid 13 years 11 months ago #20822

Way to go!!!! That is great. You still wiping tears from you eyes?

Please Log in or Create an account to join the conversation.

Re: 1500vid 13 years 11 months ago #20911

  • bobo
  • bobo's Avatar
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 549
  • Karma: 22
  • Thank you received: 0
Cool Good Job !! Cant wait to get my Challenger running again ..Is that a Lake or a river ? Up here we would have houses every 100 foot on the shore .Looks like the 70 club isnt far away . Are you thinking about the 80 Club ?? L.O.L.. You be carefull now ..

Please Log in or Create an account to join the conversation.

Re: 1500vid 13 years 11 months ago #20920

  • milkdud
  • milkdud's Avatar Topic Author
  • Offline
  • Gold Boarder
  • Gold Boarder
  • Posts: 563
  • Karma: 42
  • Thank you received: 3
Yep Im running on a lake. The river is just to hard to figure out speeds on, unless you do a two way average and that is never perfect either. Next year I will run it on the river a lot, and that makes it interesting when you can pick up 5 mph with the current.

With my current set up I think I will top out at 75, when I do a few more mods to raise the motor 1-2 inches higher.

I am looking for a cheap 1.78 set of gears to keep my RPMS's down and be able to use my best two cleavers a 25 and 26


With the 1.78 gears and the 26 pitch and some motor height work I bet this rig could get close to 80mph, no joke.(my wife weighs 72 lbs less than me I need to get her a helmet)


that set up would run the motor at 6300 RPM, which should be close to the peak HP for a J block Im guessing.

Who knows, Ive just touched the surface with this motor. I have the timing way back and the motor still lower than it needs to be.

Run the timing up some run the motor up and hang on :ohmy:

Conrad

Please Log in or Create an account to join the conversation.

Re:1500vid 13 years 11 months ago #20924

  • Neil
  • Neil's Avatar
  • Offline
  • Platinum Boarder
  • Platinum Boarder
  • Posts: 1997
  • Karma: 65
  • Thank you received: 1
Conrad
Sounds like you can't wait for summer, well, like the rest of us. :)
I say, 1500 Merc, let the big dog eat!!!!!!!!!
I'm with bobo, be careful.
Neil

Please Log in or Create an account to join the conversation.

Neil and Mary Ousnamer

Re: 1500vid 13 years 11 months ago #20940

Hold on to your hat! Or you will loose it! Oops, did I see it fly off?

Please Log in or Create an account to join the conversation.

Hello, World!!
  • Page:
  • 1
Time to create page: 0.179 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1967 23 ft powercat flybridge
( / Boats)

noimage
11-17-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 6784 guests and one member online