TOPIC: merc 1150 inline six

merc 1150 inline six 10 years 3 weeks ago #101808

boba1000 Offline Fresh Boarder Posts: 1 Thank you received: 0	I am going to rebuild my 1982 merc 1150. What size are the connecting rod bolts that hold the rods on the crankshaft? They look like a star or torx socket/ Anyone? Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:merc 1150 inline six 10 years 3 weeks ago #101810

Dr_Frankenmerc
Offline
Contributing Member
Posts: 1433
Karma: 185
Thank you received: 44

I'll check for you in the morning (PST), if I went out to the shop this late the alarm system would get me in trouble with momma.

I 'think' they call for a 12 point 1/4" socket.
The are 1/4"x28NFT stretch to torque cap-screws that can not be re-used.
I'll get the Fastenal part number for you in the AM too.
doc

Okay,...
I use a 12 point 1/4" by 1/4" drive socket.
At Fastenal the cap screws are part number 0161312
They are referred to as: 1/4-28 x 1" FerCap at Fastenal.
HTH,
doc