TOPIC: Fuel pump plumbing request inline 6

Like a doofus, I took all my fuel pump lines off without considering that I'd have to reinstall new ones some day. Does anyone have a good photo of the routing on an inline 6 engine? I know how the carbs link together, the mystery is primarily with the fuel pumps.

Thanks guys!

www.ishopmarine.com/ishop/jsp/AsplIsmCcatViewBase.jsp?&lvlCode=4&pCode=C0002320&path=MM~A0000001~M0000100~M0000101~C0002320&isFromCMS=false&hideAdd2CartButton=&isStandAlone=&is4CmsShop=&reqln=Unknown&reqem=Unknown&reqph=Unknown&reqFor=29&req4Browse=1&docId=&docName=&isForSupStore=true&cCatFilter=MM&eCatSupFldr=supplier-050-025-MM

Review the parts break-down in the link above. You may need to 'zoom in' to see which fuel line goes where.
Doc

Thanks,

I had found that diagram but my motor isn't/wasn't plumbed that way of course.

I think I am just going to have to start over again with the lines and copy the original setup.

what year is your motor ?? it might help with getting the right diagram.. or picture..
my motor is a 79 with a single fuel pump.. so its pretty simple..

Its a 1971 with twin pumps.

I am going to replumb it like shown on the above diagram just to make life easier for me in the future (or some other guy).