TOPIC: Bilge plug hole question

Bilge plug hole question 11 years 8 months ago #84766

Dave the Wave Topic Author Offline Contributing Member Posts: 493 Karma: 21 Thank you received: 0	What is name of part that bilge plug goes in.And not just "hole"!! A metal repair part and where to order. Thanks Dave +++Also looking for some nice transom handles for the 59 +++ Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Florida's Amphicar restoration destination

Re:Bilge plug hole question 11 years 8 months ago #84771

jbcurt00
Offline
Moderator
Posts: 738
Karma: 51
Thank you received: 15

Drain tube

Avail in plastic, aluminum & brass all over the internet.

Diff diameter tubes for bilge vs livewell/cooler drains.

If you use brass or aluminum, you'll need a flanging tool from Moeller. Or DIY tool is discussed here:
forums.iboats.com/boat-restoration-building-hull-repair/installing-new-drain-tube-transom-334894.html

I bought a flanging tool, and my drain tubes from iboats.com

FG probably has a similar thread, but I don't have it readily available to post

Please Log in or Create an account to join the conversation.

Re:Bilge plug hole question 11 years 8 months ago #84905

Dave the Wave Topic Author Offline Contributing Member Posts: 493 Karma: 21 Thank you received: 0	Thank You. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Florida's Amphicar restoration destination