TOPIC: How easy is disassembly of Selectric LU?

How easy is disassembly of Selectric LU? 14 years 10 months ago #33605

n0ukf
Topic Author
Offline
Fresh Boarder
Posts: 37
Karma: 3
Thank you received: 0

I'll need to remove and dig into the lower unit of my '64 40hp Lark. From what I've heard, the springs are probably stuck (rust?) to the shift magnets so that it acts like it's in both forward and reverse at the same time with no power applied.
Is it a simple enough job for someone mechanically inclined to fix? (I've replaced clutches on K-cars, nasty job to do.) Does it require any special Evinrude tools?

Please Log in or Create an account to join the conversation.

Re: How easy is disassembly of Selectric LU? 14 years 10 months ago #33623

professor Offline Gold Boarder Posts: 758 Karma: 87 Thank you received: 1	The " old wives tales " just won't go away. Just take it apart to see what is really wrong in there. Nothing special as far as factory tools required to take it apart. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.