TOPIC: Exhaust manifolds

Exhaust manifolds 7 years 2 months ago #130420

herters59
Topic Author
Offline
Contributing Member
Posts: 263
Karma: 101
Thank you received: 12

I need some help. I am trying to locate a set of marine aluminum 302 Ford exhaust manifolds. Cast are easy to find new and used but I am interested in aluminum. I watch eBay and craigslist. Does any one have any leads I can chase. With all the 302s in boats there must be some place I can find these.
This email address is being protected from spambots. You need JavaScript enabled to view it.
Thanks Del

Please Log in or Create an account to join the conversation.

Re:Exhaust manifolds 7 years 2 months ago #130426

Nautilus Offline Contributing Member Posts: 1575 Karma: 87 Thank you received: 58	Contact Glenwood marine. They have what you need for either inboard or stern drive applications. You'll probably need deep pockets. www.glenwoodmarine.com/Catalog.htm www.glenwoodmarine.net/Catalog/MANIFOLDS.pdf Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Website: NautilusRestorations.com Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes...

Re:Exhaust manifolds 7 years 2 months ago #130439

herters59 Topic Author Offline Contributing Member Posts: 263 Karma: 101 Thank you received: 12	Natutilus that was a big help. But before I spend that kind of boat money I hope I can find a used set. Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:Exhaust manifolds 7 years 2 months ago #130447

Nautilus
Offline
Contributing Member
Posts: 1575
Karma: 87
Thank you received: 58

You probably already know that a 302 and 351 are basically identical as far as bolt-on parts are concerned. The exhaust manifolds are the same. 351's are more plentiful (as in Ski Nautiques) so putting a "want ad" up at the Correct Craft site might get some results.

On aluminum manifolds, the condition of the flanges and mating surfaces is critical. Make sure you see good photos before you buy.

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

Re:Exhaust manifolds 7 years 2 months ago #130458

herters59 Topic Author Offline Contributing Member Posts: 263 Karma: 101 Thank you received: 12	Nautilus another good lead. I shall look into the Correct Craft site. D Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.