|
Welcome,
Guest
|
This is where great FiberGlassics are found and shared. Be it Craigslist, Ebay or your local classifieds, post your sightings here for others to see.
|
TOPIC: Any Guess what it is ? 700 dollars
Re: Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124858
|
Not even a guess but it's a nice looking little toy. At some point there was a Biker or a Mexican involved though. How else do you explain the chain link steering wheel ?
 |
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124861
|
coincidence ? looks close....
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124865
|
Styled after an XKE ?!? Might hint to British manufacture no ? I was thinking more late 50's Corvette myself.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124879
|
Might be Italian and styled by or after a Ferrari.
Cool little boat no matter what it is. Karsten |
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124880
|
I forgot about that original Testarossa ! Maybe a little of all 3 ? It's sweet enough.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124889
|
I'm rolling on that. A bit of a hike (Flint to southern Ohio), trailer might be an adventure.
But like like Puppy said in Mad Max. WE GO! It will be mine. |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124890
|
not too bad of a drive. I won an outboard on e-bay in Flint once. Left Cincy at 6 AM was back home by 2:30 PM. But then again ? I wasn't pulling a trailer I knew nothing about ?
Make sure to take plenty of pictures once you start working on it. Good Luck and safe travels once you strike a deal ! |
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124892
|
Why not contact the Ohio DNR and track down the registration number? That ought to tell you the manufacturer and year.
|
|
|
Please Log in or Create an account to join the conversation.
Website: NautilusRestorations.com
Mentor to the unenlightened! "Never allow logic to interfere with a boat purchase." - J. S. Hadley "Vintage quality beats new junk every time." - J. S. Hadley "Anything supposed to do two things does both of them half-assed." - J. S. Hadley "Success makes... |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124894
|
GIT ER DUN
That trailer looks a lot newer than the boat. Maybe a grease gun for the bearings and some tire inflator just in case. Good luck, I can't say it's unique but WOW is it different ! |
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124896
|
Split the hull and beef the heck out of the transom, add some knees and drop a 50 HP or so on it.
Looks might you could need to address the head lights and the way they are mounted....Looks like they are Siliconed in place now.. Let the fun begin. Karsten |
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124909
|
Tools,Jack,two spares, fix a flat,stand alone lights, grease, PB blaster my little Makita impact,extra tie downs, an extra bow winch, big azzed zip ties (oh thats right), Some other stuff I don't even know what it is, a mug of coffee, My dog "trouble" ,my F-150 and a mild hangover.
I am ready and on my way! Rolling! Pics to follow |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124912
|
Oops, sorry I forgot the dog ! LOL. Is the hangover optional ?
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124916
|
hope he gets it home OK ? He forgot the most important item.... Duct tape !
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124919
|
It's an impala craft avenger. built in Ont. Canada. Sandy has one. There is several out there and even a web page for the boat.
|
|
|
Please Log in or Create an account to join the conversation.
Glasspar g-3 Owners Club, Marque Club Representative ACBS
www.g3owners.com |
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124921
|
You nailed it.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124929
|
On its way home!
|
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124948
|
Home, safe and sound. Just checked it out good, hooked up my stand alone lights and drove it home.
Good night. |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 2 weeks ago #124958
|
Nice score, glad to see it go to one of the members here.
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 1 week ago #124981
|
Okay so ya gotta motor a motor hung yet and the boat rigged....Where the heck are the pic's
We all want to see more. Karsten |
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 1 week ago #124991
|
They are coming. It's been raining cats and dogs here since I got back. Not going to be doing any rigging anytime soon. I haven't even been able to tear out the old knarly carpet yet to see what horrors await me!
:<D I did do a quick outside wash job, thats it though. It was a pretty boffo green metal flake originally. I think I will see how much of the sprayed on too thick Yellow paint will just blow off with my power washer. I would like to think I could get that original gel coat back. Probably dreaming on that one.. The bow is up waiting for the sun to do it's job. |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 1 week ago #125000
|
Don't be surprised if you do get the gel coat back. The hull on my G-3 was white and burgundy until I hit it with the power washer. The white paint literally blew off revealing a cream colored factory gel coat finish. Shocked the you know what out of me but apparently a lot of people don't prep it right and the paint never really adhere's. You might get lucky. I liked mine better white though.
 |
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 1 day ago #125516
|
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 1 day ago #125523
|
I did see that.
So far I have torn the carpet out. Let it sit bow up in the (unrelenting!) sun. The lady I bought it from said her and her former husband split the hull and did the floors and transom. I believe they did. BUT, I think they ignored any stringers/cores that may have been underneath. I say this because I can dig a little under the floor and easily grab old rotted wood pulp :<( And the floor is just Marine ply. No glass The hull is super solid though. Looks like I will be splitting it again. Heavy boat for it's size. As per the norm I think some of that is water logged wood below the floor, but really this boat seem's to be quite well built. The glass is thick. I will post pics and play story time when I get started. Right now I am more than knee deep in other projects, Totally rebuilding a 351 Cleveland 4V (72' "CJ") into a 71' Torino G.T and a "Mid-West" Gw Invader knock off that I have the hull split on right now.. My wife(!) and I really dig this boat. I can't wait to get going on it! The heat is slowing me down! It's hot for mid Michigan this summer! I love the heat, but man! :<D |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 1 day ago #125528
|
The Cleveland's the big block and the Windsor and Michigan's were small blocks if I remember my Ford's. That 4V designation has always puzzled me. Most say it means it's got a 4 barrel carb but in french ads it's written as 4 vitesse and I believe that means "speed". Never figured that one out. Since you like the red and white motors are you going Starsky and Hutch on the Torino ?
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 22 hours ago #125544
|
On a 351 Cleveland the heads are totally different between 2v and 4v (two and four barrel). The 4V heads have 2.19 inch (!!!!) intake valves, huge "sewer" ports. Same basic head as the Boss 302.
The motor SLEEPS until 2500 rpm and then they come on like they are on a turbocharger. It's a scooter in a "old car" way. BTW the Chev 454 has 2.19" intake valves. Think about that... |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 21 hours ago #125545
|
Did you know the pistons on some 74 cubic inch Harleys are interchangeable with a 396 Chevy ? Hmmmm... LOL
I've always liked the Cleveland. My favourite truck motor by far. Tons of bottom end and almost bulletproof. My old boss had a pair of them in a 30 foot Pacemaker Flybridge and for a tank that thing could go alright. |
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 20 hours ago #125547
|
Firstglassproject,
I have never seen a 351 Cleveland in a Ford truck from the factory. What year were they supposed to be in a pickup or truck? |
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 19 hours ago #125549
|
The boss's F-150 at Sparks Windows had one when I was 17 so that would have been about 1981. I think it was a special addition trim package (XLT or something like that?) but I always thought the motor was stock. He'd had a couple strokes so I doubt he swapped it out.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 19 hours ago #125553
|
You may want to take a look at this article in Wikipedia on the F series pickup from 1980 to 1986. Scroll down to the table of available engines and you can see that there were no 351 Cleveland engines in trucks during that period.
en.wikipedia.org/wiki/Ford_F-Series_seventh_generation The 351 C 4V engines had exceptional high RPM airflow, but didn't have a lot of torque at lower RPM so Ford kept them out of trucks and marine use. You may have been thinking of the Windsor version. |
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 17 hours ago #125556
|
The Harley 74 has a 3 7/16 bore I think the 396 has something close to 4" bore have built a lot of harleys in my life they also have a big dome on the harley piston the only 74 with a flat piston would be from the 30's to early 40's flat head
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 16 hours ago #125557
|
The 351 Cleveland was only produced from 1970-1974.
The 351M and 400 were a similar design but had almost no interchangeable parts with the 351C. But we digress.....:<) |
|
Please Log in or Create an account to join the conversation.
Stay calm. Move on.
|
Re:Any Guess what it is ? 700 dollars 9 years 9 hours ago #125561
|
Can't remember which but I thought it was a neat tip. I know it wasn't the knuckle because I tried it on my 47. Bob Very from B&D Restorations built a few of them and he specialized in Flatheads and Knuckles so I'd say you're right.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 9 hours ago #125562
|
No, don't digress
I don't know what year the truck was, I just drove it in the early 80's for work. If it wasn't a Cleveland we put a lot of wrong stuff in it and it still worked. |
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 9 years 7 hours ago #125568
|
With apologies to Chuck in Cincinnati for thread jumping, I agree with Clyde that this portion of the thread should end, and with the facts that Ford never sold a 351C in a truck or boat, and there is no way you can put a 4 inch piston in a 3-7/16" bore.
Firstglassproject, you may want to do a little more fact checking before you jump into a thread. |
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 9 years 6 hours ago #125569
|
Yeah. Nobody ever customized anything. I drove that truck for years but I admit to getting the Harley tip second hand from a builder. Now I'm off to the garage to take a look at my mechanics new toy, a mid 60's Cadillac Fleetwood limo with the turbo diesel from a Ford truck in it. Have a great day. This is known as a Big Block Harley and uses Chevy pistons and valves. Built in 1984 by a guy with imagination.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 8 years 11 months ago #125585
|
4 V dies mean 4 barrel carberator when speaking FORD.
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 8 years 11 months ago #125596
|
Thanks 54 Flyer.
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
Re:Any Guess what it is ? 700 dollars 8 years 11 months ago #125599
|
..."don't worry bout the mule going blind...just load the wagon"...!!!
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 8 years 11 months ago #125836
|
the 4v is for # of venturies
|
|
|
Please Log in or Create an account to join the conversation. |
Re:Any Guess what it is ? 700 dollars 8 years 11 months ago #125848
|
Thanks Ponyboy
|
|
Please Log in or Create an account to join the conversation.
Damn the torpedoes, full steam ahead !
|
|
Moderators: kensikora, classicfins, bruce gerard, billr, mrusson, cc1000, MarkS, Waterwings, Nautilus, jbcurt00
Time to create page: 0.122 seconds
Donate
Please consider supporting our efforts.
Glassified Ads
1957 Lone Star Caribbean |
1960 Wizard Baronet 18 w/Bearcat 55 Motor( / Boats)
07-21-2025
Glassic wanted!( / Wanted)
07-20-2025
FG Login
FiberGoogle
Who's Online
We have 9462 guests and no members online