Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: 1964 Johnson deluxe restoration project for 2021

1964 Johnson deluxe restoration project for 2021 4 years 6 months ago #142352

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Some evening info. This afternoon I could just take 3 pictures over the fence. I hope to get it back tomorrow if the owner is available! There will be a lot of restoration work




Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 6 months ago #142356

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Some more pictures. There is really a very big restoration to do.

















Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 6 months ago #142357

  • Robby321
  • Robby321's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 902
  • Karma: 42
  • Thank you received: 10
Lotta work coming but be fun, one day at a time. My friend Dad had one way back in the 60's......

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142400

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Yes one day at a time !
Some pictures of the deluxe parts. Engine hood, and a pair of seats of a Rogues.











Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142480

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Hello, to take care a little before starting the hull I repair the trunk of the engine which is in poor condition. Some big cracks and the bottom of the trunk in 3 pieces.
Assembly and installation of a first band of resin.
the rear panels :









Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142481

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
the trunk base :












not finished...

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142528

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Finally today I was able to retrieve the boat with truck and store it at a friend’s.











Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142561

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Restoring the steering wheel of my Deluxe.
It was really damaged and burned by the sun since it was abandoned. The boat has been dry for more than 30 years !
I had to first remove the tape that was on and melted, then I had to fill all the cracks made by the sun with mastic and then I sanded and painted it. the result is not perfect as Agleason but it still remains in better condition than at the start.



















Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142562

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Before



After

Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142603

Wheel looks fantastic, I like the two tone I might have to try something like that on mine!

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 5 months ago #142611

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
yes it's nice. I copied Agleason's restoration :)
The following user(s) said Thank You: agleason

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142674

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
I will continue with the minor work. The windshield lift system is being rehabilitated. Disassembly of the mechanical part and the engine, cleaning, painting, reassembly :)







Disassembled parts



Cleaning, degreasing, brushing, painting...













Reassembled set



Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142681

Excellent!

Bob

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142691

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

Waterwings wrote: Excellent!

Bob


Merci ;)

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142703

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1577
  • Karma: 87
  • Thank you received: 58
Great work! Want a job? By the way, I have a dash board and dash panel and port and starboard red/green lenses if you need them.

I'm doing a resto-mod on a Dual Deluxe and repowering with OMC 120s using GM exhaust manifolds and risers.





Attachments:

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142705

I've seen this mod in person and it's pure perfection!

Bob

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142706

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1577
  • Karma: 87
  • Thank you received: 58
Perfection is a l o n g stretch, Bob. I'm making a lot of this stuff up as I go along. Right now, it's a 17' paper weight. I assume it will float, probably steer, possibly run and hopefully won't self-destruct during sea trials. I'll be running 26 wires from the engines to the dash panel. If I can get better than half the things working properly, I'll proclaim victory, have a beer and take the rest of the day off! Here'a shot of the starboard engine terminal blocks. Wish me luck!

Attachments:

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142707

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

Waterwings wrote: I've seen this mod in person and it's pure perfection!

Bob

Actually bob great restomod

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142708

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

Nautilus wrote: Great work! Want a job? By the way, I have a dash board and dash panel and port and starboard red/green lenses if you need them.


If I want a job..... I’d like to but I can’t leave mine and i live in France :) . This is a job I would like to do but my free time allows me to practice this work for fun.
Thank you for your proposal for the dashboard and the starboard red/green lenses. I may have to get a dashboard, but I’m not sure, but I’m interested for the lenses.
I have not yet begun the restoration of the hull. Maybe this summer but the boat is not at home which is not practical . For now I am finishing my johnson reveler. I have to try it next week. I look forward to it.

Do not hesitate to put more picture of your restomod. it will help me for mine

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142719

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1577
  • Karma: 87
  • Thank you received: 58
You should give serious thought to converting the outdrive bellows to the newer "square" style:
nuwavemarine.com/sierra-transom-seal-omc-909527-18-2768/
These bellows are not cheap but they are available and brand new. The round bellows are absolutely impossible to find, even used ones. I had to go with the round ones because two engines didn't leave enough room.

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

1964 Johnson deluxe restoration project for 2021 4 years 4 months ago #142721

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
I have 2 more. One new and one in good condition. I will see when the time comes. In France they are sometimes found.

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #142994

I can tell you how to put the tiny grooves back in if you want...
Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #142995

Thanks So Much!

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #142996

Nautilus wrote: Great work! Want a job? By the way, I have a dash board and dash panel and port and starboard red/green lenses if you need them.

I'm doing a resto-mod on a Dual Deluxe and repowering with OMC 120s using GM exhaust manifolds and risers.





The engine turning looks great!

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #142997

evb11 wrote: Yes one day at a time !
Some pictures of the deluxe parts. Engine hood, and a pair of seats of a Rogues.













I have this piece from my Deluxe and I will be glad to give it to you.

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #143015

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Thanks ;)
I send you a MP

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #143016

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

agleason wrote: I can tell you how to put the tiny grooves back in if you want...


The one I have has none. It’s not the same model as yours. I guess it’s not the original one, or depending on the years of production they weren’t identical.
It seems to me that you reshaped the striations with a small saw blade?

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 3 months ago #143051

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Hello, some small work started today. Disassembly of the boat parts.
the rest of the dashboard, the rest of the windshield (frame), tank support, what remains of the reinforcements of the rear panel....
Many aluminum parts are oxidized, the rusted screws had to be cut as impossible to disassemble. Restoration work in perspective.
The floor and foam are full of water and the hull will require a big job.





















Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 2 months ago #143143

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Disassembly and cleaning of the side shelf pedestals. Some are in very poor condition and all oxidized











Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 1 month ago #143407

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Some news. Stripping of some pieces...... I’m moving slowly !







Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 4 weeks ago #143426

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Continuation of small works....





Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 4 years 1 day ago #143557

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Hello, there are 2 types of steering wheel on the deluxe. Which model for which date? 1962-63 for glitter and 1964-65 for white gray?



Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143567

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Nobody knows then if the models of the steering wheels vary according to the years.........?
Today, I received from a friend the dashboard. It also restores a deluxe. It is a little distorted but I will make it beautiful!



Attachments:

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143582

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1577
  • Karma: 87
  • Thank you received: 58
Some additional photos of the 1963 Dual Deluxe resto-mod......
















Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143587

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
Really beautiful this restoration. I can't wait to see it finished. On my side I can't wait to start restoring the hull.....

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143588

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7
......And thank you Nautilus for sharing. Do not hesitate to post more pictures.....

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143593

That is one beautiful boat.
I see you have the original round boots between the transom and outdrive. I haven't been able to locate that part, where did you find them. I would greatly appreciate the information.
Thanks
Walt

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143595

  • evb11
  • evb11's Avatar Topic Author
  • Offline
  • Junior Boarder
  • Junior Boarder
  • Posts: 94
  • Thank you received: 7

wjkboats wrote: That is one beautiful boat.
I see you have the original round boots between the transom and outdrive. I haven't been able to locate that part, where did you find them. I would greatly appreciate the information.
Thanks
Walt

It’s very difficult to find. I don’t think they’re manufactured anymore. The only ones that can be found are opportunities or ends of stock or from individuals. I have 2 for my reveler but for the deluxe I will probably pass on the more recent model if I mount an old omc engine !

Please Log in or Create an account to join the conversation.

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143610

  • Nautilus
  • Nautilus's Avatar
  • Offline
  • Contributing Member
  • Contributing Member
  • Posts: 1577
  • Karma: 87
  • Thank you received: 58
I put "OMC 12 hole transom" in an Ebay search and saved it. After about a year, an NOS one turned up for $125...I bought it and considered myself lucky. After that, another one turned up...good used. Bought that one for about $50 I think.

I suppose you could buy the "square" one with 16 holes, carefully cut it round and then punch your own holes but I've never tried it.
The following user(s) said Thank You: wjkboats

Please Log in or Create an account to join the conversation.

Website: NautilusRestorations.com

Mentor to the unenlightened!

"Never allow logic to interfere with a boat purchase." - J. S. Hadley
"Vintage quality beats new junk every time." - J. S. Hadley
"Anything supposed to do two things does both of them half-assed." - J. S. Hadley
"Success makes...

1964 Johnson deluxe restoration project for 2021 3 years 11 months ago #143646

Thank you
I took your idea and put the search on E bay. If nothing shows up I'll try to make on from the 16 hole square transom seal.
Walt

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.915 seconds

Donate

Please consider supporting our efforts.

Glassified Ads

1967 23 ft powercat flybridge
( / Boats)

noimage
11-17-2024

Mercury outboard
( / Engines)

noimage
11-03-2024

Classic Mercury Outboard Motors
( / Engines)

Classic Mercury Outboard Motors
10-18-2024

FG Login

FiberGoogle

Who's Online

We have 6439 guests and no members online